Number plates

Number Plate Font Rules: Size, Spacing, Colours and Fines

Exact measurements, the myths that cost people fines, and what fails an MOT.

The legal font for UK number plates is the standard lettering set out in the regulations, and since 1 September 2001 every new plate must use it with fixed sizes: characters 79mm tall, 50mm wide (except 1 and I), a 14mm stroke, 11mm between characters and 11mm margins. Break the rules and the penalty is a fine capped at £1,000 plus a failed MOT. Any vehicle made made from 1 January 1980 onwards needs reflective plates: white behind black characters at the front, yellow behind black at the rear.

Most of the arguments about plates come from a handful of beliefs that are half true. This guide takes them one at a time, with the exact measurements. Everything comes from the DVLA leaflet INF104, GOV.UK’s “Displaying number plates” pages and the MOT inspection manual, read on 20 November 2026.

The measurements, in one table

What is measuredCars and most vehicles (from 1 Sept 2001)Motorcycles, tricycles and small quadricycles
Character height79mm64mm
Character width (not 1 or I)50mm44mm
Stroke (thickness of the black)14mm10mm
Space between characters11mm10mm
Gap between the age pair and the random letters33mm30mm
Margins (top, bottom, sides)11mmat least 11mm
Vertical space between lines19mm13mm

Plates fitted before 1 September 2001 follow a larger set: INF104 gives 89mm characters, 64mm wide, with a 16mm stroke and 13mm spacing, for what it calls Group 1. Traditional plates for vehicles made before 1 January 1973 use the smaller 79mm set. If your car is older than 2001 and carries bigger characters, that isn’t automatically illegal.

The MOT manual adds one mercy: testers don’t physically measure the characters and should reject only when they are obviously incorrect. That is a testing rule, not a licence to be sloppy, and a roadside check or camera operator can look harder.

Myth: “any clear font is fine”

It isn’t. The regulations introduced a standard font on 1 September 2001, which ended italics and other hard-to-read styles. The MOT manual says characters must be formed using the prescribed font or be substantially similar to it, and must not be italic, sloping, or made from broken or multiple strokes. A stylised “gothic” or “script” set may look sharp and still fail.

Spacing matters as much as shape. The 11mm gap between characters and the 33mm gap that sets the age pair apart from the three random letters split the plate into two groups, “AB12 CDE”. The MOT manual adds that on plates with no date (such as those issued before 1963, and Northern Ireland plates) the spacing between groups of characters still applies, and a plate should have no more than two groups, which means one 33mm gap. The only room is around a 1 or an I, where the spacing may be proportionately greater.

Myth: “I can space the letters to spell a word”

GOV.UK is blunt about it: letters and numbers may not be rearranged or altered until they’re hard to read. INF104 gives an example: fixing bolts to change any of the letters or numbers. It adds that a registration can, in some cases, be withdrawn for good, and that anyone who misrepresents a number loses the money paid for it. Pushing a zero to look like an O, or squeezing two characters together so a word reads cleanly, is exactly that. See cherished and dateless number plates for the rules on what you can choose.

Colour depends on position and age. GOV.UK requires reflective material, white behind the front characters, yellow behind the rear ones, and black characters on each. The MOT manual specifies this for vehicles made on or after 1 January 1980, and adds that plates must be fitted vertically, or as close to vertical as reasonably practicable.

Older vehicles have a concession. The MOT manual allows white, grey or silver characters on a black background, but only on vehicles manufactured before 1 January 1980, and INF104 says an application to DVLA is needed. If you own a classic and want the traditional look, check the current conditions on GOV.UK first.

Myth: “3D and 4D plates are illegal”

3D characters are allowed. Raised (3D) characters are allowed on GOV.UK’s page, and the MOT manual’s list of what plates may do includes raised or 3D lettering. The finish is what counts. Characters can’t be removable or reflective, and GOV.UK adds that on plates fitted after 1 September 2021 each character must be one shade of black throughout. The MOT manual says a raised character’s whole surface, including the sides, must be one shade of black. Grey for a 3D or highlight effect is allowed only on vehicles first used before 1 September 2021.

The GOV.UK pages we read don’t mention “4D” plates, so we say nothing about them beyond the general rule: if anything about the surface changes how the character looks to a camera, it can fail. The MOT manual says tints, films or any fixing that changes the appearance or legibility of a character aren’t allowed, and ANPR cameras treat non-reflective material as black.

What else makes a plate illegal

  • No British Standard mark. GOV.UK says plates must carry the number BS AU 145e if fitted after 1 September 2021 (BS AU 145d before), with the supplier’s name or trademark and postcode of the supplying outlet. The MOT tester doesn’t check those details, but the law requires them.
  • A background pattern. GOV.UK says no. The MOT manual rejects background overprinting and honeycomb-type backgrounds on vehicles first registered on or after 1 September 2001, although back-lit plates can have a honeycomb-type construction legitimately.
  • Obscured or damaged plates. Delamination, cracks, and a tow bar or bike rack covering the number all count. The manual flags the position of fixing screws and bolts that change a character.
  • The wrong flag or identifier. On the left you may show the Union flag, St George’s Cross, the Saltire or the Welsh dragon, with a matching identifier (UK, GB, ENG, SCO, CYM or WALES, for example). The flag must be above the identifier, neither may sit in the margin, and each is capped at 50 millimetres across.
  • A border outside the limits. An optional non-reflective border within the margin must be no wider than 5mm and kept 10mm clear of the characters if the vehicle was first used from 1 September 2021 onwards. Earlier vehicles get 6mm and 5mm.
  • A plate that is missing or insecure. The MOT manual treats a missing plate, one likely to fall off, an illegible inscription, an incorrect registration, and one that does not conform to the specified requirements as major defects.

How much is the fine, and what happens at the MOT?

Driving with wrongly displayed plates can cost you up to £1,000, GOV.UK states, and the vehicle will fail its MOT. In the MOT manual, each of the plate defects above is a major one. A major defect means a fail. The fix is usually a new plate from a registered supplier; you can only get plates made up by one, and the supplier will ask to see proof of your name and address, plus evidence that the number is yours to use, a V5C for instance.

Plates and a car’s history check

Illegal plates are also a warning sign when you’re buying a car. A plate that’s slightly off may hide a bigger problem: a car that has been through a plate change, a registration that doesn’t belong to it, or a cloned number. A number plate check gives the make, model, colour and MOT history for the registration shown, which you can compare against the car on the forecourt. A full report, £11.99 or more, includes a number plate history check showing earlier plates on the car. See the sample report, and read our guide on cloned number plates if the plates and the paperwork don’t line up. If you’re after a number, our guide to private plate transfers covers the move, and the car registration check, free car check and prices pages show what each check includes before you pay.

Plates when you drive abroad

A plate showing the UK identifier beside the Union flag needs no UK sticker abroad, says GOV.UK. You must display one if your plate has letters and numbers only, a GB identifier with the Union flag, an EU flag or a national flag of England, Scotland or Wales. To drive in Spain, Cyprus and Malta you must display a UK sticker whatever your plate shows. You don’t need one in the Republic of Ireland. Don’t put a sticker on the plate itself.

Questions

What font is legal for UK number plates?

The prescribed standard font, in force since 1 September 2001. The MOT manual accepts a substantially similar font but not italic, sloping or broken-stroke characters.

How big must the characters on a number plate be?

On a car fitted from 1 September 2001: 79mm tall, 50mm wide (except 1 and I), with a 14mm stroke. Motorcycles use 64mm, 44mm and 10mm.

How far apart should characters be?

11mm between characters, a 33mm gap separating the age pair from the random letters, and 11mm margins all round. Motorcycle plates use 10mm and 30mm.

Are 3D number plates legal?

Yes, if the characters are not removable or reflective and, on plates fitted after 1 September 2021, a single shade of black all over.

What is the fine for an illegal number plate?

GOV.UK sets the ceiling at £1,000, and the car also fails its MOT.

Can a number plate carry a flag?

Yes: one of the four national flags with its identifier on the left, outside the margin, and no wider than 50mm.

Where can I get legal plates made?

From a registered number plate supplier. GOV.UK says it can only be done by one, and you’ll need proof of identity and of your right to the number.

Free vehicle checkMOT history, mileage, tax and MOT

Free car check